Wiring Modules

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

The JA-111H-AD and H-TRB (TRouBle) is designed for the connection of any control device with contact or impulse outputs to the 100 system and provides it with a power supply from the control panel bus.

Size: 16x30x12mm

JA111H-AD TRB = Arm / Disarm / Trouble

The Jablotron JA-190PL multipurpse installation box for JA-100 modules.

Suitable for: JA-110T, JA-110Z, JA-110Z-B, JA-110N, JA-111N, JA-150N, JA-151N, JA-121T, JA-118N, JA-120N.

Size: 90 x 90 x 35mm

The Jablotron JA-192PL multipurpse outdoor installation box for JA-100 modules.

Can be used for: JA-111TH, JA-151TH, JA-111SH.

Size 70 x 62 x 35mm

The Jablotron JA-194PL multipurpse installation box for JA-100 modules.

Supported modules: JA-121T, JA-118M, JA-114HN, JA-116H, JA-110N, JA-111N, JA-150N, JA-118N, JA-110T, JA-110Z, JA-110Z-B, JA-110Z-D.

Size: 182 x 132 x 45mm

The Jablotron JA-195PL multipurpse installation box for JA-100 modules.

Supported modules: JA-110N, JB-110N, JA-150N, JA-111N, JB-111N, JA-151N, JA-118N, JB-118N, JA-118M, JA-121T, JA-111H-AD TRB, JA-111H TRB, JA-110T, JA-110Z-B/C.

Size: 102 x 102 x 34mm

The Jablotron JA-110i BUS activation indicator signals section setting or PG output activation (1-32) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The Jablotron JA-112i BUS activation indicator signals section setting or PG output activation (1-128) by a red LED.

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

The Jablotron JA-111i indicates activation of PG outputs by multi-colored LEDs (red, green, blue and yellow).

It is connected to the control panel via the bus.

Size: 62 x 36 x 27 mm.

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

The JB-118N eight-channel output module provides eight galvanic isolated outputs. For example, it can be used to control optical indicating elements, radio communicators or power relays.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.

The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus.

Size: 78 x 45 x 15mm

Jablotron JA-120Z Bus back-up booster. Designed for current boosting of the bus, extension of the line length and galvanic isolation of the bus.

Alarm cable 6x0.22mm + 2x 0.5mm, 100m outdoor flexible 6-veins shielded.

Alarm cable 4x 0.22mm + 2x 0.5mm, 100m outdoor flexible 6-veins shielded.

Jablotron CC-01 Bus cable.

- 1 x 2 x 24 AWG (0.2mm²)
- 1 x 2 x 20 AWG (0.5mm²)

Jablotron CC-02 Bus cable unshielded EasyReel 300m.

- 2 x 2 x 24 AWG (0.2mm²)

Jablotron CC-03 Bus cable unshielded EasyReel 250m.

- 3 x 2 x 24 AWG (0.2mm²)
- 1 x 2 x 20 AWG (0.5mm²)

Jablotron CC-11 Bus cable 200 meter.

Flammability class B2CA with a high resistance to fire propagation along cables and to toxic combustion emissions.

• 1 × 2 × 20 AWG (0.5 mm2)
• 1 × 2 × 24 AWG (0.2 mm2)