Search results for: 'UniView'

DSC PowerSeries NEO HSM2300 monitored power supply module for the NEO.

DSC PowerSeries NEO HSM2955R 2-way Alarm Audio Verification Module

Intratone DINA Video Intercom With Keypad Surface-mounted Anthracite 4

Hikvision DS-KD-TDM is a intercom module, touch display with MiFare card reader

Intratone IT-DINACR-32-0003 DINA Create Master module without central unit.

Intratone DINA-28-0005-EU surface mounted Video Intercom for 20 apartments.

• Surface-mounted
• Digital nameplates 20
• Push buttons 20
• Proximity-reader
• Door relais
• IP 54
• Size: 225 x 400 x 27mm (WxHxD)

DSC RM-1C single relay module with screw terminals.

DSC PowerSeries NEO HSM2204 Power module with 4 high power outputs.

DSC PowerSeries NEO HSM2208 Module for 8 outputs.

DSC PowerSeries NEO HSM2108 wired input module for 8 zones.

Jablotron JA-116H BUS expander is used for powering and connecting up to 16 (non-Jablotron) detectors with contact outputs. Supports wired loops: NC, repeated pulses, single EOL or double EOL.

Check our BLOG  Jablotron JA-116H Module for instructions and tips.

A bus module that provides four wired inputs with adjustable EOL resistor values, four galvanically separated signal PG outputs and an auxiliary power supply, protected with an electronic fuse.

The JB-118N eight-channel output module provides eight galvanic isolated outputs. For example, it can be used to control optical indicating elements, radio communicators or power relays.

Check our BLOG  Jablotron 100 Fibaro connection for instructions and tips.

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with power. It's an embedded module that can be mounted in a wired detector. It also indicates malfunction or status of a device.

Size: 16x30x12mm

JA111H TRB (Trouble / Fault)

Intratone DINA Create 1 Nameplate with bell push button.

The JA-110Z-D is designed to connect JA-100 bus lines.

It can be divided into two independent bus branches by the disconnection of jumpers. Can be installed in a JA-194PL box.

Size: 182 x 132 x 45mm

The JA-110T bus isolator is designed to electrically seperate and protect vulnerable parts of the bus.

Size: 78 x 45 x 15mm

The JA-110Z-B is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 70 x 63 x 15mm

The JA-110Z-C is designed to connect JA-100 bus lines. Can be installed in a JA-190PL box.

Size: 40 x 39 x 15mm

The Jablotron JA-118M BUS module for wired magnetic detectors.

- 8 inputs (EOL / wired loops: NC, repeated pulses or single balanced)

Intratone IT-DINACR-32-0002 DINA Create Keyboard Anthracite.

The JA-110Z BUS module is designed for branching the bus of the 100 system.

It is protected from being attacked by a pair of tamper contacts. Supplied in a suitable JA-194PL mounting box.

Size: 40 x 39 x 15mm

The JA-121T module is a universal adapter to RS-485 for other systems. It enables connection of the JABLOTRON 100 system bus to an RS-485 serial line and vice versa.

Size: 52 x 38 x 14mm

The Jablotron JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus.

Inclusive: 3 x Eneloop rechargeable battery.

Size: 90 x 90 x 35 mm

The JA-110G-CO wireless module for connection of an Ei208W(D) CO detector.